Forged Heat Sink

Uncategorized

Filter By:

Showing 13–24 of 26 results

  • Forged Heat Sink

    Forged heat sinks are manufactured by either pressing, pounding, or squeezing metal metal under great pressure, producing parts of exceptionally high strength. The forging die process usually starts with hot, pre-heated metal at a specific temperature. This type of heat sink can be a good choice when you need a high aspect ratio for any fin type made from either copper or a lighter weight aluminum

    Quick View
  • Heat Pipe

    Cooling Source mainly uses sintered or powdered copper heat pipes.

    • Under any kind of orientation: horizontal, gravity-aided or against gravity
    • Can handle high heat flux density (the heat load divided by the heated area)
    • Great potential to increase thermal performance with wick structure to accommodate the increasing CPU thermal dissipation demand
    • Consistent thermal performance
    • Optimal for high volume production
    • Can produce complex design
    Quick View
  • Heat Pipe Assembly

    Cooling Source mainly uses sintered or powdered copper heat pipes.

    • Under any kind of orientation: horizontal, gravity-aided or against gravity
    • Can handle high heat flux density (the heat load divided by the heated area)
    • Great potential to increase thermal performance with wick structure to accommodate the increasing CPU thermal dissipation demand
    • Consistent thermal performance
    • Optimal for high volume production
    • Can produce complex design
    Quick View
  • Heatsink 45 x 45 x 10mm – CS8674510B1

    Part Number Size Height PG Weight
    CS8674510B1 45X45 10 1 37g
    Quick View
  • Heatsink 45 x 45 x 20mm – CS8674520B0

    Part Number Size Height PG Weight
    CS8674520B0 45X45 20 0 52g
    Quick View
  • Interface Material

    Cooling Source works with a variety of suppliers, including Chomerics, Laird, Bergquist, Fujipoly and can apply the TIM of your choice at our plant to save you  time to market. Typical interface material includes:

    • Thermal grease
    • Tapes
    • Gap Fillers
    • Phase Change
    • Graphite
    • Epoxy
    • rohs
    Quick View
  • Plastic Injection Modling

    Cooling Source provides the highest level of quality and service for your close-tolerance plastic injection molded components. We offer the latest state of-the art molding equipment, ranging in size from 90 to 530 tons. Our new machines are computer controlled and process monitored. All machines have dedicated mold temperature controllers, desiccant material dryers and material loaders.

    We process all thermoplastic material from commodity materials such as polyethylene and engineering thermoplastics.

    Quick View
  • Push Pins

    Spring loaded push pins are available in nylon 66 or brass.

    • Ease of attachment to the PCB.
    • Precise and controllable pressure between the heatsink and component.
    • Optimize the performance of the TIM
    • Available in various height to achieve desired pressure
    • Plastic push pin normal force up to 3 lfb per pin
    • Brass push pin hold in place heavier heatsinks. Normal force up to 5 lfb per pin
    • rohs
    Quick View
  • Skived Fin

    Skived heat sinks are manufactured by utilizing cutting tools and a controlled slicing technique to produce heat sinks made from a solid block of aluminum or copper. If your needs require a high aspect ratio, thin fins, low tooling costs and unidirectional flow, skived heat sinks could be an excellent solution for your application. As always, our knowledgeable experts can guide you towards the best choice for economy and production time to meet your needs.

    Quick View
  • Stamped Fin

    Stamped fin heat sinks are manufactured by the application of extreme pressure to a piece of aluminum or copper to produce fins of the desired height, thickness and shape, which are then bonded to the heat sink metal base.

    Stamped fin heat sinks are often recommended when you require a thin fin with limited thermal performance. They are characterized by a high tooling cost and low cost per piece.

    Quick View
2021 Las Positas Ct, Ste 101
Livermore, CA 94551
Phone: (925) 292-1293
Fax: (925) 292-5061


HR/Employment: 
hr@coolingsource.com

Sales Information: 
sales@coolingsource.com
Website Feedback: 
webmaster@coolingsource.com

Copyright © 2021 - Cooling Source .
All rights reserved worldwide.




X